According to Command Alkon, decarbonization of the cement and construction industry is essential to reach the goals set out in the 2015 Paris Agreement, which seeks to limit global warming to well below 2 degrees Celsius, preferably to 1.5 degrees Celsius, compared to pre-industrial levels. This includes a goal to reach net zero global greenhouse gas emissions by 2050. Importantly,…
Read MoreDay: June 14, 2023
HGH Offers Kilnscan Rotary Kiln Shell Temperature Monitoring
Kilnscan is a high-performance thermal scanner from HGH dedicated to the real-time, 24/7 temperature monitoring of the kiln shell. It displays the full temperature profile of the kiln and gives early warning of hot spots indicative of refractory failure. With the highest scan angle of the industry up to 140 degrees, Kilnscan adapts to any kiln configuration: long shell with…
Read MoreDragon Products Displayed the Cement Pig
Dragon Products, a dealer for Utah trailer specialist Ranco by Western, arrived at ConExpo-Con/Agg with the “Cement Pig,” a customized SP 55-4100 Guppy Bottom Dump, splashed with horizontal cement storage nomenclature. The 23,500-lb. trailer is equipped with a 20-in. aluminum cast pressure cover, six hopper bottoms, plus one 5-in. discharge and two 4-in. blow down lines. Equal to 4,100 cu.…
Read MoreRegal Rexnord Displays RexPro Engineered Steel
Regal Rexnord Corp., a global manufacturer focused on the engineering and manufacturing of electric motors and controls, power generation products and power transmission components, featured its RexPro engineered steel chain and bearings product line at the 2023 IEEE-IAS/PCA Cement Conference at the Dallas-Hilton Anatole, April 23-27. Visitors to the company’s booth participated in a hands-on demonstration by the Regal Rexnord…
Read MoreBolivia, Honduras Strengthen Their Cement Industries
By Mauro Nogarin The Bolivian vice minister of industrial production affirmed that the construction works of the new Potosí cement plant, which belongs to the Bolivian Cement Productive Public Company (Ecebol), continues unabated and, according to a new technical report, it will begin operations in November. “Currently, civil works present a 99% progress, the mechanical and electrical part 93%, that…
Read MoreTotal Construction Starts Slip
Total construction starts fell 4% in April to a seasonally adjusted annual rate of $1.04 trillion, according to Dodge Construction Network. Nonresidential starts led the drop as manufacturing fell 22% following strong performance in March. To balance the decline, nonbuilding starts rose 7%, and residential building stats gained 12%. On a year-to-date basis through April, total construction starts were 7%…
Read MoreContinental Cement to Get FLSmidth Alternative Fuel Tech
Continental Cement, a wholly owned subsidiary of Summit Materials, awarded FLSmidth a contract for the first commercial installation of the FUELFLEX Pyrolyzer at its Davenport cement plant in Buffalo, Iowa. FLSmidth’s FUELFLEX Pyrolyzer enables cement plants to replace fossil fuels with waste-derived fuels in the calciner. The technology offers a lower CAPEX solution than competing technologies, noted FLSmidth, with the…
Read MoreArdex Americas Banks On Pneumatic Conveying Line
Ardex Americas, a supplier of engineered cements, adhesives and high-performance building products, encountered wear problems at the elbows of its pneumatic conveying lines handling sand at its Dallas, Ga. plant. The lines transfer materials between bulk handling trucks, eight silos, and batch-weighing and blending operations. Six of the silos hold cement, limestone and plaster. “Those materials are not very abrasive…
Read MorePerfecting the Process
World’s Largest Calcined Clay Kiln Requires Precise Metering And Blending. By Ernesto Duran Argos Rio Claro, Colombia, owned and operated by its parent company Cementos Argos, wanted to achieve a higher clinker substitution rate for its portland cement, by blending alternative cementitious materials. This substitution is helping to advance the company’s sustainability drive to achieve zero carbon emissions by 2050…
Read MoreSmart Kiln Maintenance
Refractory Maintenance Is Unavoidable, But An Experienced Crew With The Right Equipment Can Minimize Scheduled Downtime And Virtually Eliminate Installation Mistakes That Could Lead To Emergency Maintenance. By Heather Harding Time is money. No place is this adage more appropriate than the manufacturing industry. When even one piece of the system is down, whether for routine maintenance or an unexpected…
Read More